Toolroom Horizontal Milling

toolroom_mills
HR-14

HR Toolroom Series

Toolroom Horizontal Milling Machine

  • Small Footprint Horizontal
  • Fully Manual With 3 Handwheels
  • Simple Menu Programming
  • Perfect for Toolroom, Job Shop & Repair Facilities

HR-14

40” x 20” x 20”

REQUEST INFO

Overview

The Fryer HR-14 Toolroom Horizontal is perfect for shops requiring a small footprint machine that won’t break the budget. Designed by toolmakers, for toolmakers, this machine features handwheels so you can make parts fast. Simple menu programming and Do One operations speed you through small lot machining. Available with a 16” platter rotary table so you can work multiple sides in one set-up. Also available is full guarding, 16 tool ATC, high speed spindles and other productivity features.

FEATURES

  • 20 HP 8,000 RPM CAT-40 taper spindle
  • 16 tool automatic tool changer
  • Rigid tapping with peck feature
  • Rugged heavy duty Meehanite castings
  • Absolute encoders - no homing required
  • Handwheel run feature

EASE OF USE

  • 3 handwheels for manual use
  • “Do One” semi-automatic mode
  • Simple menu programming – no codes of any kind
  • Reads standard G & M codes from CAD-CAM systems
  • Electronic probe cycles
  • Solid model part verification
Previous Next

CNC Control

Overview

The Fryer - Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.
cnc_control
 
FRYER-SIEMENS 828 CNC
  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode
TECHNOLOGY
  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine
 
Geometry Creator
Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.
cnc_control
Pocketing Cycles
Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.
cnc_control
 
Drilling Cycles
Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.
cnc_control
3D Graphic Simulation
The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.
cnc_control
Please download our CNC Control brochure for more detailed information.
 
Previous Next