| MACHINE OPTIONS |
 |
|
|
|
|
|
|
| OPT-2108 |
|
FLOOD COOLANT SYSTEM (Includes high volume pump and adjustable nozzle.) |
| OPT-2118 |
|
OIL SKIMMER (automatically removes tramp oil from your coolant system) |
| OPT-9204 |
|
END OF CYCLE LIGHT |
| OPT-9202 |
|
DOOR INTERLOCK SWITCH |
| OPT-3346 |
|
1/2 HP DRILL MOTOR - CROSS SLIDE MOUNTED |
| OPT-3348 |
|
SPINDLE DISK BRAKE - Locks spindle for drilling or milling operations |
| OPT-2126 |
|
RENISHAW AUTOMATIC TOOL PRE-SETTER |
|
|
Arm type pre-setter swings into position for automatically setting length and diameter offsets. |
| OPT-2120 |
|
GRAPHITE MACHINING PACKAGE |
|
|
This package includes one piece sealed way covers, special air/oil system, sealed enclosure and air pressurized electrical cabinets. |
|
|
|
| TOOLPOSTS, TURRETS & TOOLING |
|
|
|
|
|
|
|
| OPT-2999 |
|
DORIAN SUPERQUICK TOOL POST (5/8" TOOLING- ET-10,14) |
|
|
Includes: 5 Piece Tool Holder Set, Riser Block, and Installation |
| OPT-3001 |
|
DORIAN SUPERQUICK TOOL POST |
|
|
Includes: 5 Piece Tool Holder Set, Riser Block, and Installation |
|
|
|
| OPT-3004 |
|
4 POSITION ELECTRONIC TOOLPOST - All machines except ET-10 |
| OPT-3005 |
|
TOOLPOST RISER BLOCK FOR ADD-ON TOOLPOST |
| OPT-3007 |
|
8 STATION BI-DIRECTIONAL AUTOMATIC TURRET (5/8" TOOLING- ET-14) |
| OPT-3008 |
|
8 STATION BI-DIRECTIONAL AUTOMATIC TURRET (3/4" TOOLING - ET-18) |
| OPT-3010 |
|
8 STATION BI-DIRECTIONAL AUTOMATIC TURRET (1.0" TOOLING - ET-21, 25) |
|
|
|
| OPT-3401 |
|
12 STATION BI-DIRECTIONAL |
| OPT-3403 |
|
12 STATION BI-DIRECTIONAL |
|
|
These turrets will accept live tooling at any station using a VDI toolplate. Turret includes 10 HP live tool spindle motor with rigid tap and surface transformation feature. This provides full milling cycles such as pocketing and contouring to be easily programmed using the conversational menus. |
| OPT-0227 |
|
C' AXIS CONTOURING AND INDEXING SPINDLE |
|
|
The 'C' Axis package includes upgrade to digital drives and motors with a high torque digital spindle motor, timing pulley spindle drive and locking disk brake. |
|
|
|
| OPT-3329 |
|
LATHE TOOLING PACKAGE (5/8") |
|
|
(1) 80° Diamond Holder, (10) Inserts, (1) 55° Diamond Holder, (10) Inserts, (1) 35° Diamond Holder, (10) Inserts, (1) OD Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) ID Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) Trigon Tool Holder, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Cut off Tool, (1) Cut Off Tool Block, (2) Cut Off Blade, (10) inserts Straight, (10) inserts Radius, (10) Inserts, (1) Insert Extractor (Boring bar adapter sleeves not included.) |
| OPT-3330 |
|
LATHE TOOLING PACKAGE (3/4") |
|
|
(1) 80° Diamond Holder, (10) Inserts, (1) 55° Diamond Holder, (10) Inserts, (1) 35° Diamond Holder, (10) Inserts, (1) OD Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) ID Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) Trigon Tool Holder, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Cut off Tool, (1) Cut Off Tool Block, (2) Cut Off Blade, (10) inserts Straight, (10) inserts Radius, (10) Inserts, (1) Insert Extractor (Boring bar adapter sleeves not included.) |
| OPT-3302 |
|
LATHE TOOLING PACKAGE (1") |
|
|
(1) 80° Diamond Holder, (10) Inserts, (1) 55° Diamond Holder, (10) Inserts, (1) 35° Diamond Holder, (10) Inserts, (1) OD Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) ID Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) Trigon Tool Holder, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Cut off Tool, (1) Cut Off Tool Block, (2) Cut Off Blade, (10) inserts Straight, (10) inserts Radius, (10) Inserts, (1) Insert Extractor (Boring bar adapter sleeves not included.) |
|
|
|
| OPTIONAL CENTER DISTANCES & SPINDLE BORES |
|
|
|
|
|
|
|
| OPT-3013 |
|
40" CENTER DISTANCE (ET-21,25) |
| OPT-3012 |
|
60" CENTER DISTANCE (ET-18) |
| OPT-3018 |
|
BIG BORE OPTION #1 (ET-18 ) |
|
|
Includes: 3.5" spindle bore, D1-8 2 speed headstock and 15 HP motor. |
|
|
|
| CONTROL OPTIONS |
|
|
|
|
|
|
|
| OPT-2140 |
|
REMOTE ELECTRONIC HANDWHEELS |
|
|
This option takes the place of the standard panel mounted handwheels and offers you a remote, movable handwheel box containing two handwheels and a coarse/fine switch. |
| OPT-0102 |
|
HIGH SPEED NETWORK INTERFACE KIT (10/100 BASE T) |
| OPT-0210 |
|
TOUCH 2100 OFFLINE PROGRAMMING SOFTWARE |
| OPT-9200 |
|
SPARE "M" FUNCTION FOR CONNECTION OF REMOTE DEVICES |
| OPT-3104 |
|
BARFEED ELECTRONIC INTERFACE |
|
|
|
| STEADY & FOLLOW RESTS |
|
|
|
|
|
|
|
| OPT-3020 |
|
STEADY REST ROLLER TYPE 1"-4" CAPACITY (ET-14) |
| OPT-3022 |
|
STEADY REST ROLLER TYPE 1"-5" CAPACITY (ET-18) |
| OPT-3024 |
|
STEADY REST ROLLER TYPE 3"-8" CAPACITY ( ET-21) |
| OPT-3024 |
|
STEADY REST ROLLER TYPE 3"-8" CAPACITY ( ET-25 ) |
| OPT-3030 |
|
FOLLOWING REST BRONZE TYPE 0"-2" CAPACITY (ET-14, 18) |
| OPT-3032 |
|
FOLLOWING REST BRONZE TYPE 0"-3" CAPACITY ( ET-21, 25) |
|
|
|
| CHIP CONVEYORS |
|
|
|
|
|
|
|
| OPT-3038 |
|
CHIP CONVEYOR ET-18 |
| OPT-3040 |
|
CHIP CONVEYOR ET-21,25 |
|
|
|
| MANUAL CHUCK OPTIONS |
|
|
|
|
|
|
|
| OPT-3200 |
|
DIRECT MOUNT 6" MANUAL 3 JAW CHUCK (ET-14 1.65" THRU HOLE) |
| OPT-3202 |
|
DIRECT MOUNT 8" MANUAL 3 JAW CHUCK (ET-18 2.17" THRU HOLE) |
| OPT-3204 |
|
DIRECT MOUNT 10" MANUAL 3 JAW CHUCK |
| OPT-3206 |
|
DIRECT MOUNT 12" MANUAL 3 JAW CHUCK |
|
|
|
| OPT-3334 |
|
ADJUST TRU 6" MANUAL 3 JAW CHUCK (ET-14 1.65" THRU HOLE) |
| OPT-3336 |
|
ADJUST TRU 8" MANUAL 3 JAW CHUCK |
| OPT-3338 |
|
ADJUST TRU 10" MANUAL 3 JAW CHUCK |
| OPT-3340 |
|
ADJUST TRU 12" MANUAL 3 JAW CHUCK |
|
|
|
| POR |
|
4 JAW, 6 JAW AND SPECIAL CHUCKS AVAILABLE |
| OPT-3208 |
|
SOFT JAW SET FOR MANUAL CHUCKS |
| POR |
|
FACE PLATES - MULTIPLE SIZES AVAILABLE |
|
|
|
| HYDRAULIC CHUCK OPTIONS (PROGRAMMABLE WITH FOOT PEDAL) |
|
|
|
|
|
|
|
| OPT-3210 |
|
HYDRAULIC 8" 3 JAW CHUCK (ET-18 1.57" BAR CAPACITY |
| OPT-3212 |
|
HYDRAULIC 10" 3 JAW CHUCK (ET-21 & ET-25 2.56" BAR CAPACITY) |
| OPT-3214 |
|
HYDRAULIC 12" 3 JAW CHUCK (ET-21 & ET-25 2.56" BAR CAPACITY) |
| OPT-3050 |
|
HYDRAULIC ACTUATED TAILSTOCK (requires hydraulic chuck option) |
| POR |
|
HYDRAULIC ACTUATED STEADY REST (requires hydraulic chuck option) |
|
|
|
| COLLET CHUCKS |
|
|
|
|
|
|
|
| OPT-3220 |
|
5C PNEUMATIC COLLET CHUCK ET-14 and ET-18 (.062 – 1.125" CAPACITY) |
| OPT-3222 |
|
5C PNEUMATIC COLLET CHUCK ET-21 and ET-25 (.062 – 1.125" CAPACITY) |
| OPT-3228 |
|
5C COLLET SET 1/16 - 1 1/16 X 64THS |
|
|
|
| MISCELLANEOUS OPTIONS |
|
|
|
|
|
|
|
| OPT-3308 |
|
440 VAC 3 PHASE POWER |
| OPT-3310 |
|
220 VAC SINGLE PHASE POWER - price varies with machine size |
| POR |
|
A1 SERIES SPINDLES - A1 series spindles for bolt on chucks |
| POR |
|
SPINDLE FACE-PLATES - multiple sizes available |
| OPT-3304 |
|
BARFEED SYSTEMS – MULTIPLE SIZES AND CAPACITIES |
| OPT-3307 |
|
BAR PULLER (works with automatic chucks to pull short bars out like a barfeed) |
| OPT-9000 |
|
FACTORY SET-UP AND TRAINING AT YOUR FACILITY - travel expenses included |
| OPT-9002 |
|
EXTENDED PARTS WARRANTY COVERAGE FROM 1 TO 2 YEARS |
|
|
|
