| MACHINE OPTIONS |
 |
|
|
|
|
|
|
| OPT-2108 |
|
FLOOD COOLANT SYSTEM (Includes high volume pump and adjustable nozzles.) |
| OPT-2118 |
|
OIL SKIMMER (automatically removes tramp oil from your coolant system) |
| OPT-9204 |
|
END OF CYCLE LIGHT |
| OPT-9202 |
|
DOOR INTERLOCK SWITCH |
| OPT-3346 |
|
1/2 HP DRILL MOTOR - CROSS SLIDE MOUNTED |
| OPT-3348 |
|
SPINDLE DISK BRAKE - Locks spindle for drilling or milling operations |
| OPT-2135 |
|
ELECTRONIC TOOL SETTER |
|
|
This 2 axis probe auto sets the length and diameter offset for all of your tools. |
| OPT-2120 |
|
GRAPHITE MACHINING PACKAGE |
|
|
This package includes one piece sealed way covers, special air/oil system, sealed enclosure and air pressurized electrical cabinets. |
|
|
|
| TOOLPOSTS, TURRETS & TOOLING |
|
|
|
|
|
|
|
| OPT-3001 |
|
DORIAN SUPERQUICK #40 TOOL POST (1" TOOLING ) |
|
|
Includes: 5 Piece Tool Holder Set, Riser Block, and Installation |
| OPT-3015 |
|
DORIAN SUPERQUICK #50 TOOL POST (1.25" TOOLING ) |
|
|
Includes: 5 Piece Tool Holder Set, Riser Block, and Installation |
|
|
|
| OPT-3004 |
|
4 POSITION ELECTRONIC TOOLPOST - electric driven, 1" tooling |
| OPT-3004 |
|
4 POSITION ELECTRONIC TOOLPOST - electric driven, up to 1.5" tooling |
|
|
|
| OPT-3031 |
|
TOOLPOST RISER BLOCK FOR ADD-ON TOOLPOST (ET LARGE CAPACITY) |
|
|
|
| OPT-3010 |
|
8 STATION BI-DIRECTIONAL AUTOMATIC TURRET (1.0" Tooling) |
| OPT-3011 |
|
8 STATION BI-DIRECTIONAL AUTOMATIC TURRET (1.25" Tooling) |
|
|
Note: Large faceplate used on this turret will reduce available swing. Call factory. |
|
|
|
| OPT-3302 |
|
LATHE TOOLING PACKAGE (1") |
|
|
(1) 80° Diamond Holder, (10) Inserts, (1) 55° Diamond Holder, (10) Inserts, (1) 35° Diamond Holder, (10) Inserts, (1) OD Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) ID Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) Trigon Tool Holder, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Cut off Tool, (1) Cut Off Tool Block, (2) Cut Off Blade, (10) inserts Straight, (10) inserts Radius, (10) Inserts, (1) Insert Extractor (Boring bar adapter sleeves not included.) |
| OPT-3302 |
|
LATHE TOOLING PACKAGE (1.25") |
|
|
(1) 80° Diamond Holder, (10) Inserts, (1) 55° Diamond Holder, (10) Inserts, (1) 35° Diamond Holder, (10) Inserts, (1) OD Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) ID Threading Holder, (10) Threading Inserts, (10) Threading Inserts, (1) Trigon Tool Holder, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Boring Bar, (10) Inserts, (1) Cut off Tool, (1) Cut Off Tool Block, (2) Cut Off Blade, (10) inserts Straight, (10) inserts Radius, (10) Inserts, (1) Insert Extractor (Boring bar adapter sleeves not included.) |
|
|
|
| LIVE TOOL TURRETS & TOOLING |
|
|
|
|
|
|
|
| OPT-3406 |
|
12 STATION BI-DIRECTIONAL LIVE TOOL AUTOMATIC TURRET FOR 1.25" TOOLING (VDI 40) (ET-26, 30, 40) |
|
|
These turrets will accept live tooling at any station using a VDI toolplate. Turret includes 10 HP live tool spindle motor with rigid tap and surface transformation feature. This provides full milling cycles such as pocketing and contouring to be easily programmed using the conversational menus. |
|
|
|
| OPT-8046 |
|
LIVE TOOL AXIAL HOLDER VDI-40 |
| OPT-8047 |
|
LIVE TOOL RAIDAL HOLDER VDI-40 |
|
|
|
| OPT-0227 |
|
'C' AXIS CONTOURING AND INDEXING SPINDLE |
| OPT-0227 |
|
'C' AXIS CONTOURING AND INDEXING SPINDLE (6" BORE) |
|
|
The 'C' Axis package includes upgrade to digital drives and motors with a high torque digital spindle motor, timing pulley spindle drive and locking disk brake. |
|
|
|
|
|
|
| OPTIONAL CENTER DISTANCES & SPINDLE BORES |
|
|
|
|
|
|
|
| OPT-3014 |
|
80" CENTER DISTANCE |
| OPT-3016 |
|
120" CENTER DISTANCE |
| OPT-3052 |
|
160" CENTER DISTANCE |
|
|
|
| OPT-3311 |
|
HIGH TORQUE 50 HP SPINDLE MOTOR UPGRADE (requires 100 amp 440VAC service) |
|
|
|
| OPT-3019 |
|
6" BIG BORE OPTION |
|
|
Includes: 6.15" spindle bore, A2-11 4 speed headstock and 30 HP motor. 1,000 RPM max. |
| OPT-3017 |
|
9" BIG BORE OPTION |
|
|
Includes: 9" spindle bore, A2-15 2 speed headstock and 50 HP motor. 750 RPM max. |
|
|
|
| CONTROL OPTIONS |
|
|
|
|
|
|
|
| OPT-2004 |
|
REMOTE ELECTRONIC HANDWHEELS |
|
|
This option takes the place of the standard panel mounted handwheels and offers you a remote, movable handwheel box containing two handwheels. |
| OPT-0102 |
|
HIGH SPEED NETWORK INTERFACE KIT (10/100 BASE T) |
| OPT-2156 |
|
REMOTE MONITORING (requires network interface option) |
|
|
Allows monitoring of the CNC from any remote location where internet access is available. Check cycle times, spindle load, feedrate override position, program being run and more. |
| OPT-0210 |
|
TOUCH 2100 OFFLINE PROGRAMMING SOFTWARE |
| OPT-2152 |
|
EXPANDED MEMORY – 256MB |
| OPT-9200 |
|
SPARE "M" FUNCTION FOR CONNECTION OF REMOTE DEVICES |
| OPT-3104 |
|
BARFEED ELECTRONIC INTERFACE |
|
|
|
| OTHER AVAILABLE CONTROLS |
|
|
|
|
|
|
|
| Note: Options, pricing and specifications change with different controllers. Specifications listed are for 2100 control only. Please contact factory for detailed specifications on other controls. |
|
|
|
| OPT-0221 |
|
GE FANUC 0i CONTROLL |
| OPT-0211 |
|
GE FANUC 21i CONTROL |
|
|
|
| STEADY & FOLLOW RESTS |
|
|
|
|
|
|
|
| OPT-3027 |
|
STEADY REST ROLLER TYPE 3"-14" CAPACITY (ET-26,30) |
| OPT-3029 |
|
STEADY REST ROLLER TYPE 3"-14" CAPACITY (ET-40) |
| OPT-3028 |
|
STEADY REST ROLLER TYPE 14"-20" CAPACITY (ET-26,30) |
| OPT-3030 |
|
STEADY REST ROLLER TYPE 14"-20" CAPACITY (ET-40) |
| OPT-3033 |
|
FOLLOWING REST BRONZE TYPE 0"-6" CAPACITY (ET-26, 30) |
| OPT-3035 |
|
FOLLOWING REST BRONZE TYPE 0"-6" CAPACITY (ET-40) |
|
|
|
| CHIP CONVEYORS |
|
|
|
|
|
|
|
| OPT-3042 |
|
CHIP CONVEYOR (60" CENTERS) |
| OPT-3044 |
|
CHIP CONVEYOR (80" CENTERS) |
| OPT-3046 |
|
CHIP CONVEYOR (120" CENTERS, DUAL UNITS) |
| OPT-3047 |
|
CHIP CONVEYOR (160" CENTERS, TRIPLE UNITS) |
|
|
|
| MANUAL CHUCK OPTIONS |
|
|
|
|
|
|
|
| OPT-3224 |
|
DIRECT MOUNT 16" MANUAL 3 JAW CHUCK (D1-11, 5.35" THRU HOLE) |
| OPT-3225 |
|
DIRECT MOUNT 20" MANUAL 3 JAW CHUCK (7.60" THRU HOLE) |
| OPT-3445 |
|
DIRECT MOUNT 25" MANUAL 3 JAW CHUCK (7.60" THRU HOLE) |
|
|
|
| OPT-3342 |
|
ADJUST TRU 16" MANUAL 3 JAW CHUCK (5.35" THRU HOLE) |
| OPT-3343 |
|
ADJUST TRU 20" MANUAL 3 JAW CHUCK (7.48" THRU HOLE) |
| OPT-3445 |
|
ADJUST TRU 25" MANUAL 3 JAW CHUCK (9.92" THRU HOLE) |
|
|
|
| POR |
|
4 JAW, 6 JAW AND SPECIAL CHUCKS AVAILABLE |
| OPT-3232 |
|
16" REAR MOUNTED AUXILIARY CHUCK FOR 4" SPINDLE BORE |
| OPT-3232 |
|
16" REAR MOUNTED AUXILIARY CHUCK FOR 6" SPINDLE BORE |
| OPT-3208 |
|
SOFT JAW SET FOR MANUAL CHUCKS |
| OPT-3240 |
|
30" FACE PLATE |
|
|
|
| HYDRAULIC CHUCK OPTIONS (PROGRAMMABLE WITH FOOT PEDAL) |
|
|
|
|
|
|
|
| OPT-3216 |
|
HYDRAULIC 15" 3 JAW CHUCK (ET-30 & 40 3.54" BAR CAPACITY) |
| OPT-3217 |
|
HYDRAULIC 18" 3 JAW CHUCK (5.00" BAR CAPACITY, requires 6" bore option) |
| OPT-3242 |
|
HYDRAULIC 20" 3 JAW CHUCK (5.00" BAR CAPACITY, requires 6" bore option) |
| OPT-3050 |
|
HYDRAULIC ACTUATED TAILSTOCK (requires hydraulic chuck option) |
| POR |
|
HYDRAULIC ACTUATED STEADY REST (requires hydraulic chuck option) |
|
|
|
| MISELLANEOUS OPTIONS |
|
|
|
|
|
|
|
| OPT-3308 |
|
440 VAC 3 PHASE POWER |
| OPT-3310 |
|
220 VAC SINGLE PHASE POWER - price varies with machine size |
| POR |
|
SPINDLE FACE-PLATES - multiple sizes available |
| OPT-3304 |
|
BARFEED SYSTEMS – MULTIPLE SIZES AND CAPACITIES |
| OPT-3307 |
|
BAR PULLER (works with automatic chucks to pull short bars out like a barfeed) |
| OPT-9000 |
|
FACTORY SET-UP AND TRAINING AT YOUR FACILITY - travel expenses included |
| OPT-9002 |
|
EXTENDED PARTS WARRANTY COVERAGE FROM 1 TO 2 YEARS |
|
|
|
