| MACHINE OPTIONS |
 |
|
|
|
|
|
|
| OPT-1112 |
|
STEEL WAY COVERS |
| OPT-1116 |
|
FLOOD COOLANT SYSTEM |
| OPT-1204 |
|
KURT POWERLOCK POWER DRAWBAR |
| OPT-0320 |
|
RIGID TAPPING |
| OPT-1314 |
|
REMOTE STOP/START SWITCH |
| OPT-1110 |
|
FULL MACHINE GUARD, Full mahcine perimeter guard allows full coolant flow and heavy chip removal with no floor mess. |
| OPT-2112 |
|
SPRAY MIST COOLANT SYSTEM |
| OPT-2114 |
|
AIR BLAST SYSTEM (air nozzle for plastic, graphite and other dry materials) |
| OPT-2118 |
|
OIL SKIMMER (automatically removes tramp oil from your coolant system) |
| OPT-2122 |
|
HEIDENHAIN GLASS SCALE FEEDBACK 0.000050" RESOLUTION - X & Y AXIS |
| |
|
This is a super accurate system using dual feedback. The standard encoders provide a stable servo loop while the ultra precision scales provide final position accuracy. |
| OPT-2124 |
|
HEIDENHAIN GLASS SCALE FEEDBACK 0.000050" RESOLUTION – Z AXIS |
| OPT-4122 |
|
4" COLUMN RISER BLOCK |
| OPT-4124 |
|
8" COLUMN RISER BLOCK |
| OPT-4230 |
|
AUTOMATIC TOOL AND PART PROBE PACKAGE |
|
|
This package includes table mounted tool probe to auto set the tool length offset and a wired part probe to auto set pocket centers, bosses, and find edges. The simple graphical interface included gives the operator the fastest set-up possible. |
| OPT-2322 |
|
3 ELECTRONIC HANDWHEEL PACKAGE |
|
|
This unique package makes set-up even easier by allowing you to manually run the machine using the dual electronic handwheels for the X & Y axes as well as a 3rd handwheel which allows simple movement of the head up and down. The handwheels are mounted in a comfortable position on the front of the machine and can also be used to control the machine in Handwheel Run Mode. A joy stick and a course/fine speed control switch are included on the box as well. The package is completed with the addition of electronic stops that allow you to move to a position but not exceed it. |
| OPT-1111 |
|
FULL MACHINE GUARD |
|
|
|
| 4th AXIS ROTARY TABLES |
| Packages include heavy-duty rotary table, dual action air brake, 4th axis servo amp, brushless motor, home switch, quick disconnect plugs. |
|
|
|
|
|
|
|
| OPT-4310 |
|
8" 4TH AXIS ROTARY TABLE PACKAGE |
| OPT-4311 |
|
8" TAILSTOCK |
| OPT-4351 |
|
8" ROTARY TABLE CHUCK |
| OPT-4312 |
|
10" 4TH AXIS ROTARY TABLE PACKAGE |
| OPT-4313 |
|
10" TAILSTOCK |
| OPT-4353 |
|
10" ROTARY TABLE CHUCK |
| OPT-4314 |
|
12" 4TH AXIS ROTARY TABLE PACKAGE |
| OPT-4315 |
|
12" TAILSTOCK |
| OPT-4355 |
|
12" ROTARY TABLE CHUCK |
| OPT-4306 |
|
4 AXIS ELECTRONICS ONLY PACKAGE |
| |
|
Use this to connect your own rotary table or to add a rotary table in the future. (Includes 4th axis servo amp, all internal wiring and plugs.) |
|
|
|
| OTHER AVAILABLE OPTIONS |
|
|
|
|
|
|
|
| OPT-4214 |
|
SANDVICK #40 V-FLANGE TOOLING PACKAGE |
| |
|
Standard tooling package includes: (6) collet chucks with the following collet sizes; (1) 1/4"; (2) 3/8"; (2) 1/2"; (1) 5/8"; (1) 3/4"; (1) 1". Solid end mill holders as follows: (2) 3/8"; (2) 1/2"; (1) 5/8"; (1) 3/ 4"; (1) 1", (1) 1/2" keyless drill chuck with holder, collet chuck wrench & set-up fixture, (14) retention knobs. |
| OPT-4230 |
|
SET-UP KIT |
| OPT-4231 |
|
ELECTRONIC TOOL HEIGHT PRE-SETTER |
|
|
Magnet mounted tool probe sits on top of your part. Bring tool down until light on probe goes on. Accurate to .0002" |
| OPT-4232 |
|
30 TOOL - TABLE RACK, organize your tooling and keep it protected. |
| OPT-8002 |
|
KURT 6" HIGH PRECISION VISE |
| OPT-9208 |
|
BT-40 SPINDLE (FOR JAPANESE STYLE BT-40 TOOLING) |
| OPT-9200 |
|
SPARE "M" FUNCTION FOR CONNECTION OF REMOTE DEVICES |
| OPT-1402 |
|
440 VAC 3 PHASE POWER |
| OPT-1416 |
|
220 VAC SINGLE PHASE |
| OPT-9000 |
|
FACTORY SET-UP AND TRAINING AT YOUR FACILITY |
| OPT-9002 |
|
EXTENDED PARTS WARRANTY FROM 1 YEAR TO 2 YEARS |
|
|
|
| CONTROL OPTIONS |
|
|
|
|
|
|
|
| STD |
|
AXIS UNLOCK |
|
|
This is a new standard feature on the MB-Q Series. When working in Manual mode, this simple yet important feature allows the user to keep the X & Y axes in a locked position until needed. Simply toggle the Y MAN or X MAN buttons to enable or disable movement of the axis. |
| OPT-0602 |
|
REMOTE ELECTRONIC HANDWHEEL |
| OPT-9104 |
|
HIGH SPEED NETWORK INTERFACE KIT |
| OPT-2156 |
|
REMOTE MONITORING (Requires network interface option) |
|
|
Allows monitoring of the CNC from any remote location where internet access is available. Check cycle times, spindle load, feedrate override position, program being run and more. |
| OPT-2152 |
|
EXPANDED MEMORY - 256MB |
| OPT-2154 |
|
4TH AXIS SURFACE TRANSFORMATION |
|
|
Allows programming of flat surface features like pockets and engraving and automatically projects them on the round surface |
| OPT-2100 |
|
TOUCH 2100 OFFLINE PROGRAMMING SOFTWARE |
|
|
Easy-to-use software package that installs on a standard desktop PC and duplicates the control functions. Allows full programming and part program verification. |
