Traveling Column Machining Center


TC-V Series

Vertical Traveling Column

  • X axis travel to 320"
  • Fixed table features high load capacity
  • Table divider for work zones
  • Y axis travel of 24" or 32"


40" x 26" x 28"


80" x 24" (32") x 24" (32")


120" x 24" (32") x 24" (32")


160" x 24" (32") x 24" (32")


240" x 24" (32") x 24" (32")


320" x 24" (32") x 24" (32")



The Fryer TC-V Series features a fixed table and traveling column for flexibility with large parts and fixturing. You can use the machine as a multi-pallet design by using the table dividers to create work zones. The fixed table allows table loads of more than 10,000 lbs. and is available with a built in rotary table. The high torque 40 and 50 taper spindles feature available CTS and gearbox. Available Y axis travel of 24" or 32" and in sizes ranging from 40" X travel all the way to a huge 320" travel machine.


  • Traveling column design
  • Fixed table with 10,000 lbs. plus capacity
  • 24 tool arm type ATC
  • 1,000 IPM rapid
  • Y travel of 24" or 32"
  • Siemens or Fanuc CNC


  • Standard or tilting head spindle
  • Built-in 24" or 32" flush rotary table
  • Table mounted 4th axis and tailstock
  • Fast conversational programming
  • Fast set-up keys
  • Open style semi-guarding or fully enclosed
  • Similar to Mazak VTC
Previous Next

CNC Control


The Fryer / Siemens 828-HS control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.
  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode
  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine
Geometry Creator
Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.
Pocketing Cycles
Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.
Drilling Cycles
Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.
3D Graphic Simulation
The 828-HS uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.
Please download our CNC Control brochure for more detailed information.
Previous Next